LOONG-680E
Functions
Wire presence, terminal presence, automatic feeding, fixed length cutting, both-end stripping, both-end crimping, both-end inserting, automatic adjustment of crimping height, unloading defective products through CCD inspection, scan code to match, production data storage.
Technical Parameters
| Wire Cross-section | 0.13mm² - 2.5mm² (AWG26 - AWG13) 1mm² - 4 mm² (AWG17 - AWG11) | Stripping Length | 0-15mm±0.1mm (feed blade precise to 0.01mm) |
| Min. Length | 200mm(One end is crimped with terminals, while the other end is inserted with a minimum length of 60mm.) | CT | 2.5–3.5 s / pc (depending on product) Excluding fixture bar changeover |
| Feeding Accuracy | ±(0.2% * L+ 1.0 mm) | Compressed-air Connection | 0.5-0.7MPA |
| Max. Length | 9999mm | Power | 19kW |
| Fixture Pallet Dimension(mm) | 760mm * 80mm | Power Source | 220V / 3 Phase / 50-60 Hz 380V / 3 Phase / 50-60 Hz |
| Wire Feed-in Speed | 0-6m/s | Noise Level | ≤75dB |
| Crimping Capacity | Maximum full-turn torque: 2 tons (motor power: 750W) Note: This represents the maximum motor torque, not the rated torque, and requires specific settings to achieve. | QC Contents | Wire overload, terminal overload, stripping visual inspection,visual inspection of the number of core wires, terminal crimping visual inspection, crimping force inspection, insertion force inspection, pull back force inspection, ACD injury core wire inspection, core wire number visual inspection |
| Production Data Traceability | Wire length, stripping length, core wire inspection photo, terminal appearance inspection photo, crimping force data, insertion force data, pull-back force data, product processing information | Raw Material Error-proofing | Error proofing of wire, seal, terminal, applicator, connector by code scanning |
| Wire Selector | max. 35 wires | Wire Storage | 30 storage sites |
| Dimension(mm) | L6762 × W1495 × H2180mm (6-group crimping machine) | Weight | ≈3000kg |
| Optional | Product labeling, Lin Quan MES System, Seal station, Expandable number of crimpers, Connector loading mode: Manipulator automatic feeding, fixture bar manual feeding, fixture bar rotating feeding、terminal NG cutting, | Functions | Wire presence, terminal presence, automatic feeding, fixed length cutting, both-end stripping, both-end crimping, both-end inserting, automatic adjustment of crimping height, unloading defective products through CCD inspection, scan code to match, production data storage |